Engine Management Systems

Em-Tech EM70

Image of EM70 Kit
EM70

EM-Tech Engine Control System

The new EM-Tech range of ECUs by EMS are built from the ground up for Motorsports. The focus has been on providing the most accurate ignition and injection timing enabling you to tune an engine to its ultimate performance level. With features like SD Card data acquisition, Connectivity with the EMS Race Dash and customisable engine protection this is truly an ECU for serious motorsport enthusiasts.

        

EM-Tech ECU Software : Click to download

 

Features
  • 4 Fuel Injection Outputs - Drive up to 4 injectors sequentially
  • 4 Ignition Outputs 
  • 4 Programmable Outputs
  • 4 Programmable Voltage Inputs
  • Ethernet Laptop Communications up to 100 MB/s
  • Extensive built-in OEM trigger type support
  • Able to drive ultra low impedance injectors to minimize injector dead time
  • EMS ECU Management Software
  • CAN communication for EMS Race Dashes
  • User definable 3D Tuning - 32 X 48 user definable tuning points
  • Tune analyzer capabilities - Helps you analyze the fuel delivery map
  • Auto Tune capability - Helps you quickly tune while on the dyno
  • Automatic or Programmable staged fuel injection
  • VE and Normalized tuning methods
  • E85 Flex Fuel Ready
  • Open Loop Boost Control
  • Closed Loop Idle Control
  • Closed Loop 02 Control

Em-Tech EM80

EM80

EM-Tech Engine Control System

Built from the ground up for Motor sports. The focus has been on providing the most accurate ignition and injection timing enabling you to tune an engine to its ultimate performance level. With features like SD Card data acquisition, Connectivity with the EMS Race Dash, 3 Axis G-Senor, Knock Detection and customizable engine protection this is truly an ECU for serious motor sport enthusiasts.

        

EM-Tech ECU Software : Click to download

Features
  • 8 Fuel Injection Outputs - Drive up to 8 injectors sequentially or 4 x 4 staged sequential.
  • 4 Ignition Outputs 
  • 8 Programmable Outputs
  • 5 Programmable Voltage Inputs
  • Ethernet Laptop Communications up to 100 MB/s
  • Bult-in 3 axis G-sensor
  • Extensive built-in OEM trigger type support
  • Able to drive ultra low impedance injectors to minimize injector dead time
  • EMS ECU Management Software
  • CAN communication for EMS Race Dashes
  • User definable 3D Tuning - 32 X 48 user definable tuning points
  • Tune analyzer capabilities - Helps you analyze the fuel delivery map
  • Auto Tune capability - Helps you quickly tune while on the dyno
  • Automatic or Programmable staged fuel injection
  • Knock Control – detect knock level and count for each individual cylinder
  • VE and Normalized tuning methods
  • E85 Flex Fuel Ready
  • Open Loop Boost Control
  • Closed Loop Idle Control
  • Closed Loop 02 Control
  • Anti-Lag and Launch Control with 3D anti-lag map
  • Data logging to SD Card
  • Advanced Engine Protection

Em-Tech EM140

EMS EM140 engine management
EM140

EM-Tech Engine Control System

The EM-Tech 100 series ECUs are the next generation of aftermarket ECUs by EMS. They use 2 dual core 50MHZ processors to ensure the most accurate timing and injection signals. Built from the ground up for Motor sports, the focus has been on providing the most accurate ignition and injection timing possible.

        

EM-Tech ECU Software : Click to download

Features
  • 80 pin lever lock connector to ensure there is no functionality compromised
  • 8 Fuel Injection Outputs - Drive up to 4 injectors sequentially or 4 x 4 staged sequential.
  • 4 CAM control outputs - Control up to 4 cams
  • 4 Ignition Outputs 
  • 8 Programmable Outputs
  • 13 Programmable Voltage Inputs
  • 6 Digital inputs
  • 2 Drive-By-Wire throttle controllers
  • 2 LSU 4.9 O2 sensor inputs
  • Ethernet Laptop Communications up to 100 MB/s
  • Bult-in 3 axis G-sensor
  • Extensive built-in OEM trigger type support
  • Able to drive ultra low impedance injectors to minimize injector dead time
  • EMS ECU Management Software
  • CAN communication for EMS Race Dashes
  • User definable 3D Tuning - 32 X 48 user definable tuning points
  • Tune analyzer capabilities - Helps you analyze the fuel delivery map
  • Auto Tune capability - Helps you quickly tune while on the dyno
  • Automatic or Programmable staged fuel injection
  • Knock Control – detect knock level and count for each individual cylinder
  • VE and Normalized tuning methods
  • E85 Flex Fuel Ready
  • Open Loop Boost Control
  • Closed Loop Idle Control
  • Closed Loop 02 Control
  • Anti-Lag and Launch Control with 3D anti-lag map
  • Data logging to SD Card
  • Advanced Engine Protection

Em-Tech EM160

EM160

EM-Tech Engine Control System

The EM-Tech 100 series ECUs are the next generation of aftermarket ECUs by EMS. They use 2 dual core 50MHZ processors to ensure the most accurate timing and injection signals. Built from the ground up for Motor sports, the focus has been on providing the most accurate ignition and injection timing possible.

 

EM-Tech ECU Software : Click to download

 

Features
  • 80 pin lever lock connector to ensure there is no functionality compromised
  • 12 Fuel Injection Outputs - Drive up to 6 injectors sequentially or 6 x 6 staged sequential.
  • 4 CAM control outputs - Control up to 4 cams
  • 6 Ignition Outputs 
  • 8 Programmable Outputs
  • 13 Programmable Voltage Inputs
  • 6 Digital inputs
  • 2 Drive-By-Wire throttle controllers
  • 2 LSU 4.9 O2 sensor inputs
  • Ethernet Laptop Communications up to 100 MB/s
  • Bult-in 3 axis G-sensor
  • Extensive built-in OEM trigger type support
  • Able to drive ultra low impedance injectors to minimize injector dead time
  • EMS ECU Management Software
  • CAN communication for EMS Race Dashes
  • User definable 3D Tuning - 32 X 48 user definable tuning points
  • Tune analyzer capabilities - Helps you analyze the fuel delivery map
  • Auto Tune capability - Helps you quickly tune while on the dyno
  • Automatic or Programmable staged fuel injection
  • Knock Control – detect knock level and count for each individual cylinder
  • VE and Normalized tuning methods
  • E85 Flex Fuel Ready
  • Open Loop Boost Control
  • Closed Loop Idle Control
  • Closed Loop 02 Control
  • Anti-Lag and Launch Control with 3D anti-lag map
  • Data logging to SD Card
  • Advanced Engine Protection

Em-Tech EM180

EM180

EM-Tech Engine Control System

The EM-Tech 100 series ECUs are the next generation of aftermarket ECUs by EMS. They use 2 dual core 50MHZ processors to ensure the most accurate timing and injection signals. Built from the ground up for Motor sports, the focus has been on providing the most accurate ignition and injection timing possible.

 

EM-Tech ECU Software : Click to download

 

Features
  • 80 pin lever lock connector to ensure there is no functionality compromised
  • 16 Fuel Injection Outputs - Drive up to 8 injectors sequentially or 8 x 8 staged sequential.
  • 4 CAM control outputs - Control up to 4 cams
  • 8 Ignition Outputs 
  • 8 Programmable Outputs
  • 13 Programmable Voltage Inputs
  • 6 Digital inputs
  • 2 Drive-By-Wire throttle controllers
  • 2 LSU 4.9 O2 sensor inputs
  • Ethernet Laptop Communications up to 100 MB/s
  • Bult-in 3 axis G-sensor
  • Extensive built-in OEM trigger type support
  • Able to drive ultra low impedance injectors to minimize injector dead time
  • EMS ECU Management Software
  • CAN communication for EMS Race Dashes
  • User definable 3D Tuning - 32 X 48 user definable tuning points
  • Tune analyzer capabilities - Helps you analyze the fuel delivery map
  • Auto Tune capability - Helps you quickly tune while on the dyno
  • Automatic or Programmable staged fuel injection
  • Knock Control – detect knock level and count for each individual cylinder
  • VE and Normalized tuning methods
  • E85 Flex Fuel Ready
  • Open Loop Boost Control
  • Closed Loop Idle Control
  • Closed Loop 02 Control
  • Anti-Lag and Launch Control with 3D anti-lag map
  • Data logging to SD Card
  • Advanced Engine Protection